What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 04:01

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
He then describes Rainy Season and Lightning.
Can I fix a fridge leak myself, or should I call a pro?
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
In schematic diagrams this is the symbol for a fuse:
Is OnlyFans good or bad for the society? Why?
He then asserts :
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Can you tell me something about yourself?
[image of Common-mode choke]
what exactly is a ‘surge’ protector?
It also is a device that limits the change in current flow.
the problem then depends on "how fast does the fuse operate?".
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are two important concepts here.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Which branch of engineering is better: ECE or Civil?
At least they know the answer if they wanted it.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
For this case there are devices called Metal oxide varistors (MOV).
Did Meghan Markle Use Her College boyfriend For Star Power?
At one ohm, the resistor has a maximum of 1 watt power.
Barnstars:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Why is Eric Clapton so roundly disliked among guitarists?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Edit 2024–10.
The solar system as we know it may change forever - Notebookcheck
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
eight
This one hit behind the barn.
What nonsense did you hear today in India that made you laugh?
but this device (an Inductor) … impedes the rapid changes in the current.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–10[John johnson John Johnson ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
How do great movie moments influence how people handle real-life moral dilemmas?
nine
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The #1 Spice to Help You Poop, According to Dietitians - EatingWell
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[old diagram got deleted by accident]
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
First Sentence:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One is “what exactly is in a ‘surge protector’ ? ”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The bolt then partially travels down the line to your home.
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is 'the assistant's answer'
(Dc diagram shown, AC is similar).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
These are simplified answers to the original question, and does not change anything I wrote above.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
One
This is where this question deviates from being a 'generic' question, and becomes more specific.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is where the MOV conducts again, and dissipated the energy.
What does a fuse do?
This device then solves the entire problem.
Upvotes:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, what happens?
Because the load is inductive, the current lags the voltage.(by a bit).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
There are three different concepts here that are getting confused.
He then describes the function of a fuse.
It seems Mohan does not understand the difference between a comment and an Answer.
The other is “what does a “fuse” do?”
but I think this circuit , shows a few more pieces.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
I post the exact comment here.
A fuse is a non-resetable over current circuit protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?